Sorption and leaching potential of acidic herbicides in Brazilian soils

Leaching of acidic herbicides (2,4-D, flumetsulam, and sulfentrazone) in soils was estimated by comparing the original and modified AF (Attenuation Factor) models for multi-layered soils (AFi). The original AFi model was modified to include the concept of pH-dependence for Kd (sorption coefficient) based on pesticide dissociation and changes in the accessibility of soil organic functional groups able to interact with the pesticide. The original and modified models, considering soil and herbicide properties, were applied to assess the leaching potential of selected herbicides in three Brazilian soils. The pH-dependent Kd values estimated for all three herbicides were observed to be always higher than pH-independent Kd values calculated using average Koc data, and therefore the original AFi model overestimated the overall leaching potential for the soils studied.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Histopathological changes in the earthworm Eisenia andrei associated with the exposure to metals and radionuclides

Earthworms were exposed for 56 d to a contaminated soil, from an abandoned uranium mine, and to the natural reference soil LUFA 2.2. Histological changes in earthworm’s body wall (epidermis, circular and longitudinal muscles) and gastrointestinal tract (chloragogenous tissue and intestinal epithelium) were assessed, after 0, 14 and 56 d of exposure. Results have shown alterations in all the studied tissues after 14 d of exposure (except for the intestinal epithelium), yet more severe effects were registered after 56 d of exposure. Herein we report histopathological alterations as a good biomarker for the evaluation of soil quality. We also demonstrate that morphological changes in the body wall and gastrointestinal tract, are important endpoints that could be added to earthworm’s standardized tests, for the evaluation of soil toxicity, as part of the risk assessment of contaminated areas.     

Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using γ-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers.     

Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.     

Photobiology of corals from Brazil’s near-shore marginal reefs of Abrolhos

Coral communities were examined from highly turbid near-shore marginal reefs of Abrolhos (Brazil) to test a paradigm previously developed from observations in clear water reefs; specifically, that coral photobiological properties follow a highly conserved linear relationship with optical depth (ζ) via preferential ‘non-photochemical’ over ‘photochemical’ dissipation of absorbed light energy. PAM flourometry in situ was used to examine the photobiology of the most dominant coral species throughout the platform surfaces and bases of Abrolhos’ characteristic ‘chapeir?es’ reef framework; however, none of the species consistently adhered to the ‘clear water paradigm’. PAM measurements further demonstrated that species conformed to two different strategies of non-photochemical energy dissipation: transient but relatively rapid for the two closely related endemic species (Mussismilia braziliensis and Mussismilia harttii) as opposed to more persistent for Montastrea cavernosa, Porites astreoides and Siderastrea stellata. Further experiments demonstrated that tolerance to anomalous stress amongst species did not correspond with the non-photochemical energy dissipation strategy present but was consistent with the relative dominance of species within the chapeir?es coral communities.     

Determination of total and available fractions of PAHs by SPME in oily wastewaters: overcoming interference from NAPL and NOM

Background, aim, and scope  

Polycyclic aromatic hydrocarbons (PAHs) are often found in oily wastewaters. Their presence is usually the result of human activities and has a negative effect on the environment. One important step in addressing this problem is to evaluate the effectiveness of PAH removal by biological processes since these are the most cost-effective treatments known today. Many techniques are presently available for PAH determination in wastewaters. Solid phase microextracion (SPME) is known to be one of the most effective techniques for this purpose. When analyzing complex matrices with substances such as natural organic matter (NOM) and non-aqueous phase liquids (NAPL), it is important to differentiate the free dissolved PAH from matrix-bonded PAH. PAHs associated with the bonded fraction are less susceptible to biological treatment. The present study concerns the development of a simple and suitable methodology for the determination of the freely dissolved and the total fraction of PAHs present in oily wastewaters. The methodology was then applied to an oily wastewater from a fuel station retention basin.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.     

Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling

Collection of municipal solid waste (MSW) may account for more than 70% of the total waste management budget, most of which is for fuel costs. It is therefore crucial to optimise the routing network used for waste collection and transportation. This paper proposes the use of geographical information systems (GIS) 3D route modelling software for waste collection and transportation, which adds one more degree of freedom to the system and allows driving routes to be optimised for minimum fuel consumption. The model takes into account the effects of road inclination and vehicle weight. It is applied to two different cases: routing waste collection vehicles in the city of Praia, the capital of Cape Verde, and routing the transport of waste from different municipalities of Santiago Island to an incineration plant. For the Praia city region, the 3D model that minimised fuel consumption yielded cost savings of 8% as compared with an approach that simply calculated the shortest 3D route. Remarkably, this was true despite the fact that the GIS-recommended fuel reduction route was actually 1.8% longer than the shortest possible travel distance. For the Santiago Island case, the difference was even more significant: a 12% fuel reduction for a similar total travel distance. These figures indicate the importance of considering both the relief of the terrain and fuel consumption in selecting a suitable cost function to optimise vehicle routing.